Aerocomp types of PTS
AC2
Shipping mutually between 2 points of inception-the opportunity to purchase that provides the Aero Commost simple pneumatic tube transport system. These two stations may be within the same building as a building or structure between two different transmission possible. To a distance of 1500 meters shipping-purchase process performs without error.
In simple terms offers 3 types of installation :
1 - the bottom floor in the same line in two points - top floor position if :
The installation of this type in the carrier tube from the top down with its own weight when performing movement based on the Law of free fall, if below the blower sends carrier to blow up. If the blower itself will go to the upper floor, above the carrier which absorbs and two-way transmission of the realization completes.
2 - two points in separate buildings :
Two stations in each building with sliding doors to the region desired to be mounted. The connection between the two buildings is performed in accordance with the system and completes the installation. This type of sweating the point in the installation ( in cases where the indoor temperature is different from the external ambient temperature) is connected to the open air for the lack of the end of each station. sweating will not be resolved in this way.
3 - if it is at the same level within the same building or two points :
Sliding on one side of the station when using the system, the other point at the end of the pipe is left open. (Station can not be established) the transmission is performed with the principle of suction and blowing.
All 3 mentioned above are all used in the method of the system that is controlled electronically.
